Instructions how to install any of html6405’s custom roms on a Samsung Galaxy Note 10.1

(GT-N8000, GT-N8010, GT-N8013, GT-N8020)

  • Backup all your important data.
  • Download device specific files (GT-N8000, GT-N8010, …)
  • Download gapps (arm, pico) if you want Playstore functionality
  • Install TWRP with Odin, Heimdall or do a in recovery flash (only if your already have any custom recovery installed…)
  • Flash ROM
  • Flash gapps (if you want them)
  • Reboot and enjoy the second life of your Tab.

Here you can find all my ROM and Recoverie (TWRP) files,
just choose the least version of your preferred ROM. Also download the corresponding TWRP tar.md5 or img, depending on how you want to flash it.

If you are using a Windows PC, you will need Odin 3.10 to flash TWRP (tar.md5 file), on Linux you will flash with heimdall (img file).

GT-N8000

GT-N8010 also fits for GT-N8013

GT-N8020

No my TWRP is official, you can download it here:

Official TWRP 3.5.0

Steps to flash TWRP:

  1. Reboot your device into download mode with power button and volume down, press them as long, until you will see a warning.
  2. Enter download mode with pressing volume up once.
  3. Connect your device to your PC and install the driver if your are using Windows. (You could download and install SmartSwitch to get them)
  4. Windows: Start Odin 3.10 and fill the TWRP tar.md5 file in AP, disable auto reboot and start to flash, if everything works well you will a see pass message.
  5. LINUX: install Heimdall with sudo apt-get install heimdall, enter the directory where you’ve stored the twrp img file and flash it with: heimdall flash –RECOVERY TWRP.img (you could rename the recovery file to this…)
  6. Disconnect your device and press power and volume up as long, until it reboots. Release the power button instantly and keep holding volume up until it enters TWRP recovery.

Now if you have succesfully installed TWRP recovery, it’s time to install the rom and Gapps (if you want them…)

  1. In TWRP, you have to choose Wipe and pull „Swipe to Factory Reset“, afterwards choose again Wipe->Advanced Wipe, choose System and pull „Swipe to Wipe“.
  2. Copy the ROM-File and Gapps (both as zip file) onto your internal storage.
  3. Choose Install->“lineage-16.0-20201207-HTML6405-n8000.zip“ (for example) and Swipe to confirm Flash.
  4. Directly after the installation has been succesfull, choose again install and take the Gapps zip file (if you want PlayStore functionality)
  5. If this also has been succesfull, go to Reboot->Reboot to System and wait until the installatio assistent shows up.
  6. Enjoy my ROM’s, update’s and service :).

If you like my work, consider to donate me a coffe or a beer, it’s hard work to bring something up and cost’s many thousand hours plus money for hardware.




Links to my threads:

LineageOS 14.1

LineageOS 16.0

LineageOS 18.1

Slim7

Resurrection Remix